HomeMy WebLinkAboutC2020-070 - Rosenbauer America, LLC DBA Rosenbauer South Dakota, LLC Contract No.2020-070
COOPERATIVE PURCHASING AGREEMENT
BETWEEN
THE TOWN OF FOUNTAIN HILLS
AND
ROSENBAUER AMERICA, LLC
D/B/A
ROSENBAUER SOUTH DAKOTA,LLC
THIS COOPERATIVE PURCHASING AGREEMENT (this "Agreement") is entered
into as of March 3, 2020, between the Town of Fountain Hills, an Arizona municipal corporation
(the "Town"), and Rosenbauer America, LLC, a Delaware corporation(the"Contractor").
RECITALS
A. After a competitive procurement process, the National Joint Powers Alliance
("NJPA," now known as "Sourcewell") entered into Contract No. 022818-RSB, as amended,
dated April 16, 2018 (the "NJPA Contract"), for the procurement of firefighting apparatuses,
with related equipment, accessories, and supplies. A copy of the NJPA Contract is attached
hereto as Exhibit A and incorporated herein by reference, to the extent not inconsistent with this
Agreement.
B. The Town is permitted, pursuant to Section 3-3-27 of the Town Code, to make
purchases under the NJPA Contract, at its discretion and with the agreement of the awarded
Contractor, and the NJPA Contract permits its cooperative use by other public entities, including
the Town.
C. The Town and the Contractor desire to enter into this Agreement for the purpose
of(i) acknowledging their cooperative contractual relationship under the NJPA Contract and this
Agreement, (ii) establishing the terms and conditions by which the Contractor may provide labor,
equipment, and materials necessary to provide interior/exterior painting and related services (the
"Materials and Services") and (iii) setting the maximum aggregate amount to be expended
pursuant to this Agreement related to the Materials and Services.
AGREEMENT
NOW, THEREFORE, in consideration of the foregoing introduction and recitals, which
are incorporated herein by reference, the following mutual covenants and conditions, and other
good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged,
the Town and the Contractor hereby agree as follows:
1. Term of Agreement. This Agreement shall be effective as of the date first set forth
above and shall remain in full force and effect until March 2, 2021, unless terminated as
otherwise provided in this Agreement or the NJPA Contract.
2. Scope of Work. Contractor shall provide to the Town the Materials and Services
1
under the terms and conditions of the NJPA Contract and according to the specifications set forth
in the Contractor's Proposal attached hereto as Exhibit B and incorporated herein by reference.
2.1 Inspection; Acceptance. All Materials and Services are subject to final
inspection and acceptance by the Town. Materials failing to conform to the requirements of this
Agreement and/or the NJPA Contract will be held at Contractor's risk and may be returned to the
Contractor. If so returned, all costs are the responsibility of the Contractor. Upon discovery of
non-conforming Materials or Services, the Town may elect to do any or all of the following by
written notice to the Contractor: (i) waive the non-conformance; (ii) stop the work immediately;
or (iii) bring Materials or Services into compliance and withhold the cost of same from any
payments due to the Contractor.
2.2 Cancellation. The Town reserves the right to cancel any work order within
a reasonable time after issuance. Should a work order be canceled, the Town agrees to reimburse
the Contractor, but only for actual and documentable costs incurred by the Contractor due to and
after issuance of the work order. The Town will not reimburse the Contractor for any costs
incurred after receipt of the Town notice of cancellation, or for lost profits, shipment of product
prior to issuance of a work order or for anything not expressly permitted pursuant to this
Agreement.
3. Compensation. The Town shall pay Contractor an amount not to exceed
$513,913.79 for the Materials and Services at the rates set forth in the NJPA Contract and as
more particularly set forth in the Contractor's Proposal in Exhibit B, attached hereto an
incorporated herein by reference, to the extent not inconsistent with this Agreement.
4. Payments. The Town shall pay the Contractor monthly, based upon acceptance
and delivery of Materials and/or Services performed and completed to date, and upon submission
and approval of invoices. Each invoice shall (i) contain a reference to this Agreement and the
NJPA Contract and (ii) document and itemize all work completed to date. The invoice statement
shall include a record of materials delivered, time expended, and work performed in sufficient
detail to justify payment. Additionally, invoices submitted without referencing this Agreement
and the NJPA Contract will be subject to rejection and may be returned.
5. Records and Audit Rights. To ensure that the Contractor and its subcontractors
are complying with the warranty under Section 6 below, Contractor's and its subcontractors'
books, records, correspondence, accounting procedures and practices, and any other supporting
evidence relating to this Agreement, including the papers of any Contractor and its
subcontractors' employees who perform any work or services pursuant to this Agreement (all of
the foregoing hereinafter referred to as "Records"), shall be open to inspection and subject to
audit and/or reproduction during normal working hours by the Town, to the extent necessary to
adequately permit evaluation of the Contractor's and its subcontractors' compliance with the
Arizona employer sanctions laws referenced in Section 6 below. To the extent necessary for the
Town to audit Records as set forth in this Section, Contractor and its subcontractors hereby
waive any rights to keep such Records confidential. For the purpose of evaluating or verifying
such actual or claimed costs or units expended, the Town shall have access to said Records, even
if located at its subcontractors' facilities, from the effective date of this Agreement for the
duration of the work and until three years after the date of final payment by the Town to
2
Contractor pursuant to this Agreement. Contractor and its subcontractors shall provide the Town
with adequate and appropriate workspace so that the Town can conduct audits in compliance
with the provisions of this Section. The Town shall give Contractor or its subcontractors
reasonable advance notice of intended audits. Contractor shall require its subcontractors to
comply with the provisions of this Section by insertion of the requirements hereof in any
subcontract pursuant to this Agreement.
6. E-verify Requirements. To the extent applicable under ARIz. REv. STAT. § 41-
4401, the Contractor and its subcontractors warrant compliance with all federal immigration
laws and regulations that relate to their employees and their compliance with the E-verify
requirements under ARIz. REv. STAT. § 23-214(A). Contractor's or its subcontractors' failure to
comply with such warranty shall be deemed a material breach of this Agreement and may result
in the termination of this Agreement by the Town.
7. Israel. Contractor certifies that it is not currently engaged in and agrees for the
duration of this Agreement that it will not engage in a "boycott," as that term is defined in ARIz.
REv. STAT. § 35-393, of Israel.
8. Conflict of Interest. This Agreement may be canceled by the Town pursuant to
ARIZ.REV.STAT. § 38-511.
9. Applicable Law; Venue. This Agreement shall be governed by the laws of the
State of Arizona and a suit pertaining to this Agreement may be brought only in courts in
Maricopa County, Arizona.
10. Agreement Subject to Appropriation. The Town is obligated only to pay its
obligations set forth in this Agreement as may lawfully be made from funds appropriated and
budgeted for that purpose during the Town's then current fiscal year. The Town's obligations
under this Agreement are current expenses subject to the "budget law" and the unfettered
legislative discretion of the Town concerning budgeted purposes and appropriation of funds.
Should the Town elect not to appropriate and budget funds to pay its Agreement obligations, this
Agreement shall be deemed terminated at the end of the then-current fiscal year term for which
such funds were appropriated and budgeted for such purpose and the Town shall be relieved of
any subsequent obligation under this Agreement. The parties agree that the Town has no
obligation or duty of good faith to budget or appropriate the payment of the Town's obligations
set forth in this Agreement in any budget in any fiscal year other than the fiscal year in which
this Agreement is executed and delivered. The Town shall be the sole judge and authority in
determining the availability of funds for its obligations under this Agreement. The Town shall
keep Contractor informed as to the availability of funds for this Agreement. The obligation of the
Town to make any payment pursuant to this Agreement is not a general obligation or
indebtedness of the Town. Contractor hereby waives any and all rights to bring any claim
against the Town from or relating in any way to the Town's termination of this Agreement
pursuant to this section.
11. Conflicting Terms. In the event of any inconsistency, conflict or ambiguity among
the terms of this Agreement, the NJPA Contract, the Proposal, and invoices, the documents shall
govern in the order listed herein. Notwithstanding the foregoing, and in conformity with Section
2 above, unauthorized exceptions, conditions, limitations or provisions in conflict with the terms
3
of this Agreement or the NJPA Contract (collectively, the "Unauthorized Conditions"), other
than the Town's project-specific requirements, are expressly declared void and shall be of no
force and effect. Acceptance by the Town of any work order or invoice containing any such
Unauthorized Conditions or failure to demand full compliance with the terms and conditions set
forth in this Agreement or under the NJPA Contract shall not alter such terms and conditions or
relieve Contractor from, nor be construed or deemed a waiver of, its requirements and
obligations in the performance of this Agreement.
12. Rights and Privileges. To the extent provided under the NJPA Contract, the Town
shall be afforded all of the rights and privileges afforded to NJPA or Sourcewell, and shall be
"NJPA" (as may defined in the NJPA Contract) or Sourcewell, as appropriate, for the purposes
of the portions of the NJPA Contract that are incorporated herein by reference.
13. Indemnification; Insurance. In addition to and in no way limiting the provisions
set forth in Section 12 above, the Town shall be afforded all of the insurance coverage and
indemnifications afforded to NJPA or Sourcewell to the extent provided under the NJPA
Contract, and such insurance coverage and indemnifications shall inure and apply with equal
effect to the Town under this Agreement including, but not limited to, the Contractor's obligation
to provide the indemnification and insurance. In any event, the Contractor shall indemnify,
defend and hold harmless the Town and each council member, officer, employee or agent thereof
(the Town and any such person being herein called an "Indemnified Party"), for, from and
against any and all losses, claims, damages, liabilities, costs and expenses (including, but not
limited to, reasonable attorneys' fees, court costs and the costs of appellate proceedings) to
which any such Indemnified Party may become subject, under any theory of liability whatsoever
("Claims"), insofar as such Claims (or actions in respect thereof) relate to, arise out of, or are
caused by or based upon the negligent acts, intentional misconduct, errors, mistakes or
omissions, in connection with the work or services of the Contractor, its officers, employees,
agents, or any tier of subcontractor in the performance of this Agreement.
14. Notices and Requests. Any notice or other communication required or permitted
to be given under this Agreement shall be in writing and shall be deemed to have been duly
given if(i) delivered to the party at the address set forth below, (ii) deposited in the U.S. Mail,
registered or certified, return receipt requested, to the address set forth below or (iii) given to a
recognized and reputable overnight delivery service, to the address set forth below:
If to the Town: Town of Fountain Hills
16705 E. Avenue of the Fountains
Fountain Hills, Arizona 85268
Attn: Grady E. Miller, Town Manager
With copy to: Pierce Coleman PLLC
4711 E. Falcon Dr., Ste. 111
Mesa, Arizona 85215
Attn: Aaron D. Arnson, Town Attorney
If to Contractor: Rosenbauer America, LLC d/b/a
Rosenbauer South Dakota, LLC
100 Third Street
4
Lyons, South Dakota 57041
Attn: Donley Frederickson
or at such other address, and to the attention of such other person or officer, as any party may
designate in writing by notice duly given pursuant to this subsection. Notices shall be deemed
received: (i) when delivered to the party, (ii) three business days after being placed in the U.S.
Mail, properly addressed, with sufficient postage or (iii) the following business day after being
given to a recognized overnight delivery service, with the person giving the notice paying all
required charges and instructing the delivery service to deliver on the following business day. If
a copy of a notice is also given to a party's counsel or other recipient, the provisions above
governing the date on which a notice is deemed to have been received by a party shall mean and
refer to the date on which the party, and not its counsel or other recipient to which a copy of the
notice may be sent, is deemed to have received the notice.
[SIGNATURES APPEAR ON FOLLOWING PAGES]
5
IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date
and year first set forth above.
"Town"
TOWN OF FOUNTAIN HILLS,
an Arizona municipal corporation
(3,33a�a
Grady E. MATown Manager
ATTEST:
lizabeth urke, Town C rk
APPROVED AS TO FORM:
Aaron D. Arnson, Town Attorney
(ACKNOWLEDGEMENT)
STATE OF ARIZONA )
) ss.
COUNTY OF MARICOPA )
On C4/1-cik 3 - , 2020, before me personally appeared Grady E. Miller, the
Town Manager of the TOWN OF FOUNTAIN HILLS, an Arizona municipal corporation, whose
identity was proven to me on the basis of satisfactory evidence to be the person who he claims to
be, and acknowledged that he signed the above document, on behalf of the Town of Fountain Hills.
yL fl�j�
RHONDA M.BRENNEMAN Yl lSY��P. I 1 .
a, Notary 0U^r1Z0"a Notary Public
»� ,, M", MARICOPA COUNTY
�F'+y � �-
,:�-,,c Commission#589318
1 r.d Expires June 90,2023
(Affix notary seal here)
[SIGNATURES CONTINUE ON FOLLOWING PAGE]
6
"Contractor"
ROSENBAUER AMERICA, LLC D/B/A
ROSENBAUER SOUTH DAKOTA, LLC
a Delaware corp. : . on
By \�� I
� � `1'•
Name: S CO4 v\I Rir%
Its:
(ACKNOWLEDGEMENT)
STATE OF 4` a ' )
) ss.
COUNTY OF h/I`j .free LLB )
On 0 , 2020, before me personally appeared 0 Ye kN , the
C F_ o of ROSENBAUER AMERICA, LLC D/B/A ROSENBAUER SOUTH
DAKOTA, LLC, a Delaware corporation, whose identity was proven to me on the basis of
satisfactory evidence to be the person who he or she claims to be, and acknowledged that he or she
signed the above document, on behalf of the corporation. )
of Publi
(Affix notary seal here) LLOYD J. ARENDS
My Commission Expires
April 1, 2025
4832-4945-1189,v. 1
I
7
EXHIBIT A
TO
COOPERATIVE PURCHASING AGREEMENT
BETWEEN
THE TOWN OF FOUNTAIN HILLS
AND
ROSENBAUER AMERICA, LLC
D/B/A
ROSENBAUER SOUTH DAKOTA, LLC
[NJPA Contract]
See following pages.
v,tp�rnrr
JPA 1
Q9 At'!A'Ll
National Joint Powers Alliance°
REQUEST FOR PROPOSAL
for the procurement of
FIREFIGHTING APPARATUS, WITH RELATED EQUIPMENT, ACCESSORIES,
AND SUPPLIES
RFP Opening
MARCH 1, 2018
8:30 a.m. Central Time
At the offices of the
National Joint Powers Alliance®
202 12th Street Northeast, Staples, MN 56479
RFP #022818
The National Joint Powers Alliance®(NJPA), on behalf of NJPA and its current and potential member agencies,which
includes all governmental, higher education, K-12 education, not-for-profit,tribal government, and all other public
agencies located in all fifty states, Canada, and internationally, issues this Request For Proposal(RFP)to result in a
national contract solution for the procurement of#022818 FIREFIGHTING APPARATUS, WITH RELATED
EQUIPMENT,ACCESSORIES, AND SUPPLIES. Details of this RFP are available beginning January 11, 2018. Details
may be obtained by letter of request to Chris Robinson,NJPA, 202 12th Street Northeast, P.O. Box 219, Staples, MN
56479, or by e-mail at RFP@njpacoop.org. Proposals will be received until February 28, 2018 at 4:30 p.m. Central Time
at the above address and opened March 1, 2018 at 8:30 a.m. Central Time.
RFP Timeline
January 11,2018 Publication of RFP in the print and online version of USA Today,in the print and online version of
the Salt Lake News within the State of Utah, in the print and online version of the Daily Journal of
Commerce within the State of Oregon(note:OR entities this pertains to:
http://www.nipacoop.org/oregon-advertising and also RFP Appendix B),in the print and online
version of The State within the State of South Carolina,the NJPA website,MERX,
Noticetobidders.com,PublicPurchase.com,Biddingo,and Onvia.
February 14,2018 Pre-Proposal Conference(the webcast/conference call).The connection information will be sent to
10:00 a.m.CT all inquirers two business days before the conference.
February 21,2018 Deadline for RFP questions.
February 28,2018 Deadline for Submission of Proposals.Late responses will be returned unopened.
4:30 p.m.CT
March 1,2018 Public Opening of Proposals.
8:30 a.m.CT
Direct questions regarding this RFP to: Chris Robinson at chris.robinsonAnjpacoop.org or(218)895-4168.
1
Form C
EXCEPTIONS TO PROPOSAL,TERMS,CONDITIONS, 5::7r��.
AND SOLUTIONS REQUEST;
Company Name; Rigs slks►Re► A►►►e►ica, I,I.0 IMIA Rosenbat►er South Dakota. [.l.t' & Rosenbauer Minnesota, LL C
Any exceptions to the terms,conditions,specifications,or proposal forms contained in this RFP must be noted in writing
and included with the Proposer's response. The Proposer acknowledges that the exceptions listed may or may not be
accepted by NJPA or included in the final contract. NJPA will make reasonable efforts to accommodate the listed
exceptions and may clarify the exceptions in the appropriate section below.
Term,Condition,or NJPA
Section/page Specification Exception ACCEPTS
f
' Signature: Date: . 6' j
Proposer's S g 1
NJPA's clarification on exceptions listed above:
Contract Award
RFP1#022810 .. ..
FORM D
i it" I.
Formal Offering of Proposal '015PPA:!!'
(To be completed only by the Proposer) ;,..— ---,,-;di
'FIREFIGHTING APPARATUS, WITH RELATED EQUIPMENT,ACCESSORIES, AND SUPPLIES
In compliance with the Request for Proposal(RFP)forlEIREFIGHTING APPARATUS,WITH RELATED EQUIPMENT,
ACCESSORIES, AND SUPPLIES, khe undersigned warrants that the Proposer has examined this RFP and,being familiar
with all of the instructions,terms and conditions,general and technical specifications,sales and service expectations,and any
special terms,agrees to furnish the defined products and related services in full compliance with all terms and conditions of
this RFP, any applicable amendments of this RFP, and all Proposer's response documentation. The Proposer further
understands that it accepts the full responsibility as the sole source of solutions proposed in this RFP response and that the
Proposer accepts responsibility for any subcontractors used to fulfill this proposal.
Company Name: Rosenbauer America, LI,C DRA Rosenbaum South Dakota, Ilk& Rosenbaum Minnesota, 1,1.(
Date: 2/19/2018 - —
Company Address: 100'third Street_
City: Lyons State: SI) Zip: 57041
CAGE Code/Dun&Bradstreet Number: RA 02-447-3584, RSI) 10-229-2117 RMN 00-616-5682
Contact Person: Donley erickson I' _
fl Title: Consortium Pinhasing Manager
Authorized Signature: i ---, Brian K octet
(Name printed or typed)
1
I
I
4
6o J� M erwr gtiD�a
FORM E �� 4 * * `;'
CONTRACT ACCEPTANCE AND AWARD z
NJ PA
National Joint Perm Alliance
o94 # * * I
'PURCHnwHo
(Top portion of this form will be completed by NJPA if the vendor is awarded a contract.The vendor should
complete the vendor authorized signatures as part of the RFP response.)
NJPA Contract #:022818-RS8
Proposer's full legal name:Rosenbauer America, [IC
Based on NJPA's evaluation of your proposal,you have been awarded a contract.As an awarded vendor,you
agree to provide the products and services contained in your proposal and to meet all of the terms and
conditions set forth in this RFP,in any amendments to this RFP,and In any exceptions that are accepted by NJPA.
The effective date of the Contract will be April 16,2018 and will expire on April 16, 2022 (no later than the later of
four years from the expiration date of the currently awarded contract or four years from the date that the NJPA
Chief Procurement Officer awards the Contract). This Contract may be extended for a fifth year at NJPA's
discretion.
NJPA Authorized Signatures:
›v- �
4 ,,
NJPA DIREC R Or COOP'ATIVE C ACTS Jeremy Schwartz(NAME PRINTED OR TYPED)
AND PROCUREMENT SURE
1
�-7 Chad Coauette
NJPA EXECUTIVE DIRECTOR/CEO SIGNATURE (NAME PRINTED OR TYPED)
Awarded on April 16,2018 NJPA Contract #022818-RS8
Vendor Authorized Signatures:
The Vendor hereby accepts this Contract award,including all accepted exceptions and amendments.
Vendor Name Rosenbauer America, LLC
Auth ed Signat ry's Title CFO
ZI5k------- Brian Kueter
V OR AUTHORIZED SIGNATURE (NAME PRINTED OR TYPED)
Executed on 4/1 1 ,20AS NJPA Contract #022818-RS8
Form F �f= ,
PROPOSER ASSURANCE OF COMPLIANCE
Proposal Affidavit Signature Page *TPA}�
PROPOSER'S AFFIDAVIT
The undersigned,authorized representative of the entity submitting the foregoing proposal(the"Proposer"),swears that
the following statements are true to the best of his or her knowledge.
I. The Proposer is submitting its proposal under its true and correct name,the Proposer has been properly originated
and legally exists in good standing in its state of residence, the Proposer possesses, or will possess before
delivering any products and related services,all applicable licenses necessary for such delivery to NJPA members
agencies.The undersigned affirms that he or she is authorized to act on behalf of,and to legally bind the Proposer
to the terms in this Contract.
2. The Proposer,or any person representing the Proposer, has not directly or indirectly entered into any agreement
or arrangement with any other vendor or supplier, any official or employee of NJPA, or any person, firm, or
corporation under contract with NJPA, in an effort to influence the pricing, terms, or conditions relating to this
RFP in any way that adversely affects the free and open competition for a Contract award under this RFP.
3. The Proposer has examined and understands the terms, conditions, scope, contract opportunity, specifications
request, and other documents in this solicitation and affirms that any and all exceptions have been noted in
writing and have been included with the Proposer's RFP response.
4. The Proposer will, if awarded a Contract, provide to NJPA Members the/products and services in accordance
with the terms, conditions, and scope of this RFP, with the Proposer-offered specifications, and with the other
documents in this solicitation.
5. The Proposer agrees to deliver products and services through valid contracts, purchase orders, or means that are
acceptable to NJPA Members. Unless otherwise agreed to,the Proposer must provide only new and first-quality
products and related services to NJPA Members under an awarded Contract.
6. The Proposer will comply with all applicable provisions of federal, state, and local laws, regulations, rules,and
orders.
7. The Proposer understands that NJPA will reject RFP proposals that are marked"confidential"(or"nonpublic,"
etc.), either substantially or in their entirety. Under Minnesota Statute §13.591, Subd. 4, all proposals are
considered nonpublic data until the evaluation is complete and a Contract is awarded. At that point, proposals
generally become public data. Minnesota Statute §13.37 permits only certain narrowly defined data to be
considered a"trade secret,"and thus nonpublic data under Minnesota's Data Practices Act.
8, The Proposer understands that it is the Proposer's duty to protect information that it considers nonpublic,and it
oagrees to defend and indemnify NJPA for reasonable measures that NJPA takes to uphold such a data designation.
[The rest of this page has been left intentionally blank. Signature page below]
By signing below, Proposer is acknowledging that he or she has read, understands, and agrees to comply with the terms
and conditions specified above.
Company Name: kosenbatter America, 1,I,C DBA Kosenbaner South Dakota, 1,1,C& Rosenhatier Minnesota, 1.I,C
Address: 100 Third Street
City/State/Zip: I.yons. SI) 5704 I
Telephone Number: 605-543-559 I
E-mail Address: dfrederi on@rosenbaueramerica.com
Authorized Signature: -N1/1 1, "
Authorized Name(printe ): Brian Kueter
Title: CFO, Rosenbauei America
Date: 2/29/20 l 8
Notarized
Subscribed and sworn to before me this day of L21 I
_,20 I
Notary Public in and for the County of OA, .4„1„,,,L, State of 50
My commissio expires: a
Signature:
47••
Form P RNA/
PROPOSER QUESTIONNAIRE
Payment Terms,Warranty,Products and Services,Pricing and Delivery,and Industry-Specific Questions
Proposer Name: Rosenbauer America, LL('DBA Rosenbauer South Dakota, LLC& Rosenbauer Minnesota, 1,I,C
Questionnaire completed by: Donley Frederickson
Payment Terms and Financing Options
I) What are your payment terms(e.g., net 10, net 30)?
Due to insurance purposes, payment terms are 100% payment due upon delivery and acceptance. lithe customer
requests that payment is delayed for "X" number of days. we do require that they list us as a loss payee on their
insurance.and that apparatus does not go into service. This is addressed before the PO is issued.
2) Do you provide leasing or financing options, especially those options that schools and governmental entities may
need to use in order to make certain acquisitions?
We do offer third party leasing. It is the responsibility of the entity to secure their financing and leasing options
3) Briefly describe your proposed order process. Please include enough detail to support your ability to report quarterly
sales to NJPA. For example, indicate whether your dealer network is included in your response and whether each
dealer(or some other entity)will process the NJPA Members' purchase orders.
A Rosenbauer America dealers will work with the customer to develop specifications. The dealer will build
a specification to the customer's request then send it in to the designated factory to the engineering and
contract management departments to develop a drawing and a final price. When the dealer submits the
specification for pricing they also inform us if it is a bid or a buying program such as NJPA. The dealer will
revisit the customer with a specification drawing and proposal page for their acceptance.
The customer will write a PO to one of the Rosenbauer America factories(Rosenbauer South Dakota, I,I,C
or Rosenbauer Minnesota, 1,IX), The dealer then submits the original PO and cost analysis sheet to the
appropriate factory. The factory will confirm that it has received the order. When the factory has received
the initial order, a formal thank you letter will he sent to the customer from the factory. If the dealer is able
(see list below) to receive the PO, they include the buying program that he is using, a copy of the PO they
received, and a PO to the specified Rosenbauer America facility for the project. If the PO is issued to
Rosenbauer America or the dealer, Rosenbauer America absorbs the fee, and the fee is not added to the
price of the truck for the customer or the dealer to pay.
When the dealer submits a PO. they submit a Rosenbauer America Pre-contact Cost Analysis form. On the
Rosenbauer America Pre-contact Cost Analysis they list how the truck was purchased with a buying
program. Rosenbauer America records how it was purchased in our truck data base. See sample attached:
Within 30 days,the dealer will submit a Rosenbauer order form and air approved chassis specification.
Within 60 days, dealer will submit a final production specification that will be approved for production by a
Rosenbauer America factory staff member.
The dealers that will receive the P() arc dealers in the state of Texas, two dealers in upstate New York, California,
Hawaii and all the provinces of Casurda.
Dealer reference to location!
California and Hawaii: Burtons Fire Inc, 101 t)oker Drive, Modesto,CA &11&T, 311 Pacific Street, llonolulu, III
Western upstate New York: Empire Emergency; 3995 Lockport Rd,; Niagara Falls, NY
Eastern upstate New York: Garrison Fire& Rescue Corp.; 3334 Route 23A; Palenville, NY
Maryland& Delaware! DPC Emergency Equipment; 335 Strauss Avenue: Marydel, LW
Texas: DACO Fire Equipment, Inc.; 6000 Huddleston Street; I'attain City,TX
Manitoba,Saskatchewan, Alberta, British Columbia,Northwest Territory, New Brunswick, Prince Edward Island.
Yukon,and Nova Scotia: Rocky Mountain Phoenix;6415 Golden West Ave.; Red Deer, AB
Ontario: Res-Q-Tech; 189 Bysham Park Drive; Woodstock,ON
Quebec: Arew Feu; 5205 .1.-A, Bombardier St,; I lubert I ongueuil,t.,)(
4) Do you accept the P-card procurement and payment process?If so, is there any additional cost to NJPA Members for
using this process?
Yes, we accept the P-card procurement and payment process. There is an additional 4% added to the final cost for
members who choose to use this process.
Warranty
5) Describe in detail your manufacturer warranty program, including conditions and requirements to qualify, claims
procedure, and overall structure. You may include in your response a copy of your warranties, but at a minimum
please also answer the following questions.
Rosenbauer America warranties are provided on the options page; for instance,the body can be from one-year, five-
year, 10-year, or in the cast of the EXT a life-time transferable warranty, There are no conditions on the warranty
other than normal wear and tear, misuse,or apparatus is in an accident, $ee wmplefigtached.
• Do your warranties cover all products, parts,and labor?
Yes, all of our suppliers offer a one-year warranty for parts. and labor is covered by Rosenhauer America. The
bodies are covered for both parts and labor for the number of years the customers have chosen to have for the
body warranty.
• Do your warranties impose usage restrictions or other limitations that adversely affect coverage?
Warranty for parts do not cover normal wear and tear or misuse. II a supplier turns down a warranty for this reason
and Rosenhauer America feels that that should not be the case, Rosenhauer America will cover the cost,
• Do your warranties cover the expense of technicians' travel time and mileage to perform warranty repairs?
Warranty does cover the cost of the technicians; this is charged to us by the dealer's hourly rate. 1 ravel time is
reimbursed to the dealer by the dealer incentive program that is presented to them at the dealer meeting.Customers
will not be billed for warranty service calls.
• Are there any geographic regions of the United States for which you cannot provide a certified technician to
perform warranty repairs? How will NJPA Members in these regions be provided service for warranty repair?
There are not any geographic regions that will affect service through the proposed contraet,
• Will you cover warranty service for items made by other manufacturers that are part of your proposal,or are these
warranties issues typically passed on to the original equipment manufacturer?
Rosenhaner America's dealer network and Rosenbauer America's service management team will work with the
customer to ensure that the unit gets back in service. Rosenhauer America's service team will then work with our
suppliers to resolve the issue with the part.
• What are your proposed exchange and return programs and policies?
When an item is sent out tin' warranty. the dealer is invoiced for the item, When the dealer returns the part, the
amount will he deducted liom their account Shipping is provided by Rosenhauer America for this part.
6) Describe any service contract options for the items included in your proposal.
Out customers request many different levels of service contracts that are customized for their needs. These contracts
are furnished by our dealer network due to geographic locations.
Pricing, Delivers',Audits,and Administrative Fee
7) Provide a general narrative description of the equipment/products and related services you are offering in your
proposal.
Rosenbauer America's offer consists of the pricing break down for bodies,aerial,and chassis priced separately,which
allows the customer to build the fire apparatus they want. Rosenbaum America has included an optkms page fir each
of these categories to allow customers to add items or body styles to a basic spec or to build their own customized
apparatus.
Body Section:
There are four bodies for pumpers:
(1) The FX is a customizable aluminum or stainless steel formed body.
(2) 'lime EX') is a customizable fully-extruded aluminum or stainless steel body.
(3) The CT is a formed laser-cut,tab-and-slot panel assembly,aluminum or stainless steel body.
(4) The CRT body is a limited,customizable stainless steel bolted body.
The tenders can either be an IA or EXT.single-axle 2000-gallon or a tandem-axle 3000-gallon body.
The rescues have an EX or EX1 body option, which can he applied to mid-size rescues, small rescues,
equipment haulers, walk-in rescues, personnel haulers,command centers, hazardous material apparatus,etc.
Brush trucks/mini pumpers have specifications for a flat bed or a full body; both are customizable using the
options page.
Chassis Section:
The chassis proposal page consists of the Warrior,Commander,Avenger,commercial chassis,and the custom
chassis options pages. The options page allows the customer to change the chassis to fit their needs from
engine size, seating, interior features,etc. The options page is Rosenbauer America's entire quoting system
for chassis.
Aerial Ladders,Tee-Booms and Platforms Section:
The aerial section includes the basic aerials, the 78-foot Viper, 101-foot Cobra,mid mount aerial, tiller, and
aerial options. The options page allows our customers to build all lengths of aerials from Rosenbauer
America's entire aerial quoting system.
Specialty Aerials Section:
Rosenbauer America's specialty aerials consist of the Raptor which is a 105-fool tactical aerial ladder with a
removable basket. The T-Rex aerial is a 115-foot articulating platform, The bodies are both EXT extruded
aluminum. The specialty aerials have limited body mid aerial options.
RXT Limited Option Apparatus Section:
Rosenbauer America's program apparatus includes an MCI commercial pumper,an R X1 custom pumper,an
RV,' 1800 gallon tender,an RXT 3000 gallon tender,an RXT 78-foot aerial,and an RXT Maverick.
ARFF Section:
ARIT products consist of a Panther 6X6 with a 3,I70-gallon water tank, 500-1b dry chemical system, and a
I ugh Reach Extendable Turret (MET); a Class 5 rapid intervention vehicle with a IIRET; a Panther 4X4
with a 1,585-gallon water tank and a 500-lb. dry chemical system; a Class 4 rapid intervention vehicle; an
AirwoIf C3 with a 500-gallon water tank and a 500-1h. dry chemical system; a Class 3 rapid intervention
vehicle; an Airwolf C2 with a 300-gallon water tank and a 500.lk dry chemical system; and a Class 2 rapid
intervention vehicle.
8) Describe your pricing model (e.g., line-item discounts or product-category discounts). Provide detailed pricing data
(including standard or list pricing and the NJPA discounted price)on all of the items that you want NJPA to consider
as part of your RFP response.Provide a SKU for each item in your proposal.(Keep in mind that reasonable price and
product adjustments can be made during the term of an awarded Contract. See the body of the RFP and the Price and
Product Change Request Form for more detail.)
Rosenbauer Ante,ica is otferint a ceiling price specification; the tire truck will not be sold for any higher amount
than it is listed for. The model of fire truck that is submitted is an apparatus that has many features on it; there are
over 20,000 options listed for each truck. t)ue to the complexity of the base tnrck when a different option is picked,
the price of the truck will be no more than, or a reduction off,of the ceiling price.
9) Please quantify the discount range presented in this response. For example, indicate that the pricing in your response
represents is a 50%percent discount from the MSRP or your published list.
A pre-pay discount may be offered;for example,when the chassis is completed and arrives at the body factory, if the
customer chooses to pay for it at that time,a 2.5%discount will be deleted from the bid price of the chassis. Volume
discounts for three or more trucks will be done on a case-by-case basis.
10)The pricing offered in this proposal is
a. the same as the Proposer typically offers to an individual municipality, university,or school district.
X_b. the same as the Proposer typically offers to GPOs, cooperative procurement organizations, or state
purchasing departments.
c. better than the Proposer typically offers to GPOs, cooperative procurement organizations, or state
purchasing departments.
d. other than what the Proposer typically offers(please describe).
1 I) Describe any quantity or volume discounts or rebate programs that you offer.
Quantity discounts will he reviewed on a case-by-case basis; they will be evaluated by Rosenbauer America in
accordance with the difficulty of the build and the number of items being purchased For instance, if it is a reasonable
build with all units being built the same, an additional I°/a will be offered
12) Propose a method of facilitating"sourced"products or related services, which may be referred to as"open market"
items or"nonstandard options". For example,you may supply such items"at cost"or"at cost plus a percentage,"or
you may supply a quote for each such request.
Open market or non-standard options are considered special options by Rosenbauer America. Noscnhauci America's
special options will be offered to the customer, depending on the difficulty, at up to 20%of standard cost, This will
he noted in the spec sheet as an"S"for special option on the left side of the spec.
13) Identify any total cost of acquisition costs that are NOT included in the pricing submitted with your response. This
cost includes all additional charges that are not directly identified as freight or shipping charges. For example, list
costs for items like installation, set up,mandatory training,or initial inspection. identify any parties that impose such
costs and their relationship to the Proposer.
Customers arc responsible tou any local taxes or state fees that are not associated with NJPA or Rosenhaner America's
proposal.
14) If delivery or shipping is an additional cost to the NJ PA Member,describe in detail the complete shipping and delivery
program.
Delivery is included in the RFP in the options page. Delivery charges in the options sheet arc determined by the miles
it is from the designated factory to the customer. 'phis price is determined before the customer is presented with the
proposal and issues a Pt0.
15) Specifically describe those shipping and delivery programs for Alaska, Hawaii,Canada,or any offshore delivery.
The apparatus is driven by a member of the appropriate dealer or Kosenbauer America personnel and delivered to the
customer's location at a cost that is included in the K FP
16) Describe any unique distribution and/or delivery methods or options offered in your proposal.
If the customer would like to take delivery at the factory, they may runtish their own drivel. 'I he apparatus will need
to be paid for before it leaves the factory for insurance reasons.
17) Please specifically describe any self-audit process or program that you plan to employ to verify compliance with your
proposed Contract with NJPA. This process includes ensuring that NJPA Members obtain the proper pricing,that the
Vendor reports all sales under the Contract each quarter, and that the Vendor remits the proper administrative fee to
NJPA.
When pricing a proposal for the customer, a simple formula is used to verify the price of the apparatus compared to
the price submitted in the RFP. When the order is reviewed, Rosenbauer America staff calculates each order from a
buying program to make sure it is within the proposed ceiling price. If the customer requests, Rosenbauer America
will put together a price comparison sheet for their review. See attached for a"Sample('omparison".
18) Identify a proposed administrative fee that you will pay to NJPA for facilitating, managing,and promoting the NJPA
Contract in the event that you are awarded a Contract. This fee is typically calculated as a percentage of Vendor's
sales under the Contract or as a per-unit fee; it is not a line-item addition to the Member's cost of goods. (See RFP
Section 6.29 and following for details.)
Ihe proposed admilliSlUtill c tee that Rosenbauer America is proposing to NJPA is$2000.00 per order
Industry-Specific Questions
19) State the extent to which the solutions that you propose are compliant with standards or requirements in the US,
Canada,and/or applicable in the various states and provinces.Identify all related certifications or accreditations
Kosenbauer America abides by all standards in NFPA reconimendations, United 1,abondories, IInked laboratories
of Canada, DOT, FMVSS,CMVSS,and Transport('anada, Rosenbauer America is certified by United Laboratories
of Canada.
20) Describe the features of your proposed solution(s)that address serviceability(parts availability,maintenance,repairs,
support,etc.)and which you believe are"vendor differentiators."
Parts are not proprietary,meaning Kosenbauci America provides pad numbers so that customers may purchase these
parts locally and arc not forced to only purchase through us. We allow approved customers to be our service centers,
if this is what they prefer. These customers are allowed to use the same tools that our dealers would have access to,
such as our service program(SKS). Customers can attend our service seminars alongside our dealer service people,
Customers' service people are allowed to come and work with our people on the floor to help them understand our
process for repairs.
2 I) Describe any manufacturing processes or material specification attributes that differentiate your offered solutions.
Rosenbauer America offers a full line of products from a brush truck to a tractor-drawn aerial. The Rosenbauer pump
is manufactured by Rosenbauer in Austria, not from a third party, and it is privately labeled. Kosenbaner pumps can
be manufactured in bronze,stainless steel,or aluminum. Rosenbauer America offers its body materials in galvaneel,
aluminum, and stainless steel. Rosenbauer America's subframes are built of hot-dipped galvanized steel, stainless
steel, or aluminum. Rosenbauer America's aerials are hot-dipped galvanized for a longer life; this includes the
outriggers and the torque box. Rosenbauer America's Smart aerial is designed of the highest technology and designed
to have cab and body protection, tip-toad protection, and remote control operation from more than 300 feet away.
22) Provide any market data or research supporting the longevity or reliability of your proposed solutions.
As the dealers accept the NJPA as a buying program that they would prefer to use and accept that our customers are
leaning more and more toward using an alternative to bidding, Rosenbauer America and NJPA will continue to grow.
Rosenbaner America's solution is being accepted over other buying programs because we include our entire price
structure from our quoting system. By doing this, we make the customer and their purchasing team more comfortable
in how they purchase their new apparatus. Rosenbauer America has received PO's firr(not delivered)a total of 169
units since we were awarded our first contract in 2014.In 2014 we received eight P0's; in 2015 we received 25 PO's;
in 2016 wc received 65 PO's;and in 2017 we received 71 PO's.
23)State whether your proposal includes the sale of"demo" units and describe the process related to offerings of demo
units,if applicable.
Rmenhauer America's proposal does include the sale of demo and stuck trucks, Demos we discounted according to
the age arid amount of time it has been on the road,
Signature: „, 1.-4.r-0
I/ ..4c,........„, ,..
Date:
1
EXHIBIT B
TO
COOPERATIVE PURCHASING AGREEMENT
BETWEEN
THE TOWN OF FOUNTAIN HILLS
AND
ROSENBAUER AMERICA, LLC
D/B/A
ROSENBAUER SOUTH DAKOTA, LLC
[Contractor's Proposal]
See following pages.
rEsenuer
FkefigtztInil Terhnmiag]r
Bid Price and Delivery Schedule For
************ Town of Fountain Hills ***********
Rosenbauer South Dakota LLC is pleased to provide this bid proposal. The proposed apparatus has been
tailored around the requirements of the fire service industry and we are confident that our proposal will
meet and exceed the needs of the department. The proposed apparatus will be constructed utilizing only
the highest quality materials and workmanship available in the industry. The apparatus will provide the
upmost firefighter safety and efficiency on the fire ground along with extended life and lower
maintenance cost throughout the life of the vehicle.
One (1) Rosenbauer FX Custom pumper: $455,000.00 plus tax
Stock unit #17739 per attached specifications
Options
- Add TFT Hurricane monitor with automatic nozzle $4,086.00 plus tax
- Add Setcom intercom system $6,050.00 plus tax
- Install graphics to match FHFD fleet $5,373.00 plus tax
Pretax total $470,509.00 plus tax
Tolleson, AZ sales tax 8.8% $41,404.79
Sourcewell usage fee $2,000.00
Total Sell price $513,913.79
The specifications herein contained shall form a part of the final contract, and are subject to changes
desired by the purchaser, provided such alterations are interlined prior to the acceptance by the company
of the order to purchase, and are provided such alterations do not materially affect the cost of the
construction of the apparatus.
The proposal for fire apparatus conforms with all Federal Department of Transportation(DOT) rules and
regulations in effect at the time of bid, and with all National Fire Protection Association (NFPA)
guidelines for automotive fire apparatus as published at the time of bid, except as modified by customer
specifications. Any increased costs incurred by the first party because of future changes in or additions to
said DOT or NFPA standards will be passed along to the customers as an addition to the price set forth
above.
1
Contract Terms
Delivery:
The proposed apparatus shall be completed within 60-90 calendar days based on availability of monitor
and intercom system components.
Price Terms:
This offer shall remain valid for thirty, (30) calendar days from the quotation submittal date of February
4, 2020.
Payment:
Contract payment of one-hundred percent (100%) of the purchase price shall be paid upon delivery and
acceptance of the completed unit.
I want to thank the Town of Fountain Hills for the opportunity to serve the needs of the department.
Sincerely,
e 4Ge govie
Chad Horne
Rosenbauer America
(602) 705-5101
2
l
Mii .07Cri—it...,-. I i i i
si
IZTh
I� i 1 ' [ di '. el
r i I" I ! :1 [
E ,
`- ' .
.,
goiL,= IL.
0: i':::1 L:
„ It b
d
11,
1 1 °Ilk IIVI
I in_._miaapir,, ..-- 121:Mli
-. 777
Eliallidill
Oa tik
.,..
'i ' EI°iIi°]„p �, ....... _,,
1
. 3.1.
III
iiiim - ---..m1
'Iii ,
u ter '✓p E__
r
0
I I ' ' ti
ti
�o ® a
® T
0 1
I L I °- - `� y 4III / li v
fE
°
I . , 8
I :4) �— --------
I A'
°: : T
lirmi.lr5.--1 -
0 1
SA KI f.-----r--
1 1 Irl.1 ,,�!
II
6 1
E _. x
sw o XigAVI g I
:,�— �"E 3 6
0 .i i
1kRQip
Ala 1
d H sRl =o — ""
i =I illiffl .
I-
0 z cJ $ e Y u N
o F. x i i i i s ■ i- M nip - 4 0
Itg-
ti O c z ; m > b f 4= III iYxi. a4= !L'�^�' !^�N VI
K $ -/ H xFirgr -O0o ao l+ i ! �=N 15; "T� "aR `I
'e Z W n n a < r� rn •f I st 1 I a k z
a CO _ m Ir ■ Iio$ $ � �� o� B �6�
t J K r O S - S = I.. Y 7EE 0ni L20_ SSG rmi
eon ` �� "i!!77 KAn2 �� m~ iin
QUOTATION
Western States 17739 Western States Demo FX Pumper Demo
OK KA
1/2/2018
Quote No: 10162-0015
Job/Order No: 17739 OKKA/Tony
02/04/2020 Page 1
PART NO S DESCRIPTION QTY ID
S #17739 Western States DemW/CO1 OKKA Prod 1/2/18 1 RAS
00-00-1499 Overall Height Restriction, NONE 1 RAS
00-00-1509 Overall Length Restriction, NONE 1 RAS
00-00-1519 Overall Width Restriction, NONE 1 RAS
00-00-1529 Wheelbase Restriction, NONE 1 RAS
00-00-1539 Angle of Approach, NFPA Minimum, 8 Degrees 1 RAS
00-00-1549 Angle of Departure, NFPA Minimum, 8 Degrees 1 RAS
01-06-0500 Calculated Center of Gravity 1 RAS
01-07-0064 I--Technical Drawings, Representative Drawings 1 RAS
(5-View)(Left/Right/Rear/Front/Top)
01-07-1100 Change Orders 1 RAS
02-10-5000 Delivery(1251 to 1500 miles) 1 RAS
== Pumper/Tanker Warranties -601.170 06/01/17 == 1 RAS
01-18-0250 --Warranty, Foam Tank, UPF 1 RAS
01-18-0450 --Warranty, Water Tank, UPF 1 RAS
01-16-0150 > --Warranty, Apparatus, Body Warranty, 1 Year 1 RAS
01-19-0350 --Warranty, Bdy, Alum, 10 Years 1 RAS
01-19-2800 --Warranty, Subframe, Lifetime Galv 1 RAS
01-20-0500 --Warranty, Paint, PPG, 10 Year Pro Rated 1 RAS
01-21-0350 --Warranty, Lettering and Striping, 3 Years 1 RAS
01-17-0870 -- Pump Warranty, Rosenbauer, 5 Year 1 RAS
01-17-1050 -- Plmbg Warranty, Stnls Stl, 10 Years 1 RAS
01-33-3100 -- Mnls, Bdy Complete, 1 Set Printed With CD 1 RAS
01-33-3400 -- Mnls, Bdy Complete, Electronic Internet Service 1 RAS
02-90-0500 > Chassis, Commander Cstm 1 RAS
== Use Drop Down For Chassis Options -822.016 07/10/17 == 1 RAC2
== Pumper/Tanker-DC Electrical Sys COMMANDER ONLY-601.170 06/01/17 1 RAS
56-01-1700 > I-- Siren, Elect, Whelen 295HFS2 1 RAS
56-02-1700 I-- Spkr, Whelen SA314A, 100 Watt, Ntrl Alm 2 RAS
56-02-1650 I--Spkr Grille, Stnls Stl, "R" 2 RAS
56-03-1400 I-- Spkr Lctn, Bumper, Rcsd, One Ea Side 2 RAS
57-02-1250 S < > I-- Lt Bar, Whelen, Ultra Freedom IV, #F4N7QLED, LED, 72" 1 RAS
See Wecad print supplied with order
57-10-0100 I-- Lightbar Cntrl, with Vista E-Master& Virtual Switch 1 RAS
58-71-1570 I--Wrn Lts, Whelen, Upper Rr(2) M6 LED 1 RAS
57-20-1212 I--Wrn Lt, Drvr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
57-20-1211 I--Wrn Lt, Offcr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whin, M6, Ea 2 RAS
02/04/2020 Pa•e 2
PART NO S DESCRIPTION QTY ID
58-46-2000 < I--Wrn Lts, Whelen, Upper Side Front (2) M6 LED 1 RAS
Install on painted header above compartment doors- not up on side of hosebed
57-20-1212 I--Wrn Lt, Drvr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
57-20-1211 I--Wrn Lt, Offcr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whin, M6, Ea 2 RAS
58-61-2000 < I--Wrn Lts, Whelen, Upper Side Rr(2) M6 LED 1 RAS
Install on painted header above compartment doors- not up on side of hosebed
57-20-1210 I--Wrn Lt, Drvr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
57-20-1213 I--Wrn Lt, Offcr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whln, M6, Ea 2 RAS
58-03-6300 I--Wrn Lts, Whelen, Uppr Wing, (2) M6 LED 1 RAS
57-20-1210 I--Wrn Lt, Drvr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
57-20-1213 I--Wrn Lt, Offcr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whln, M6, Ea 2 RAS
58-03-7300 I--Wrn Lts, Whelen, lnbrd Warn Lt, (2) M6 LED 1 RAS
57-20-1212 I--Wrn Lt, Drvr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
57-20-1211 I--Wrn Lt, Offcr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whln, M6, Ea 2 RAS
58-09-2000 I--Wrn Lts, Whelen, lntrsct (2) M6 LED 1 RAS
57-20-1212 I--Wrn Lt, Drvr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
57-20-1211 I--Wrn Lt, Offcr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
58-01-2140 I-- Flange, Chrome, Wrn Lt, Whln, M6, Ea 2 RAS
58-26-2400 > I--Wrn Lts, Whelen, Low Mid Bdy (2) M2 LED, in Rub Rail 1 RAS
57-20-1010 I--Wrn Lt, Drvr, Whelen, M2, Red LED, Clear Lens, Ea 1 RAS
57-20-1013 I--Wrn Lt, Offcr, Whelen, M2, Blue LED, Clear Lens, Ea 1 RAS
58-36-2400 > I--Wrn Lts, Whelen, Low Rr Side (2) M2 LED, in Rub Rail 1 RAS
57-20-1012 I--Wrn Lt, Drvr, Whelen, M2, Blue LED, Clear Lens, Ea 1 RAS
57-20-1011 I--Wrn Lt, Offcr, Whelen, M2, Red LED, Clear Lens, Ea 1 RAS
58-01-2100 > I-- Flange, Chrome, Wrn Lt, Whln, M2, Ea 2 RAS
58-81-2000 I--Wrn Lts, Whelen, Low Rr(2) M6 LED 1 RAS
57-20-1210 I--Wrn Lt, Drvr, Whelen, M6, Red LED, Clear Lens, Ea 1 RAS
57-20-1213 I--Wrn Lt, Offcr, Whelen, M6, Blue LED, Clear Lens, Ea 1 RAS
50-04-1000 > Elecal, Base, Multi-flex, Weldon V-MUX Bdy 1 RAS
50-10-2000 I-- High Idle System 1 RAS
55-11-1300 > I-- Dr Open/Hazard Wrn Lt, Flashing LED Red Lens 1 RAS
55-13-1065 > I--V-MUX Dr Open, Isolation, Body Main Cmpt Doors, On Vista Screen 1 RAS
w/Accessories
55-14-1100 I-- Dr Open/Hazard Wrn Alarm, Buzzer 1 RAS
50-12-1092 > Swtch Panel, Multiplex, Chassis Supplied 1 RAS
50-41-3000 Air Horns, (2) Rcsd, One Ea Side Bumper, 24.5" Stuttertone, Chrome 1 RAS
50-43-2000 I--Air Horn Cntrl, Driver, Horn Ring, Air/Elec 1 RAS
50-43-2300 I--Air Horn Cntrl, Officer, Sgle Dash Swtch 1 RAS
51-00-1100 < I-- 12V Power/Ground, 20A, Ext Compt 1 RAS
I
4
02/04/2020 Page 3
PART NO S DESCRIPTION QTY ID
51-00-4010 I--Constant Power 1 RAS
51-00-1100 < I-- 12V Power/Ground, 20A, Ext Compt 1 RAS
R1
51-00-4010 I-- Constant Power 1 RAS
51-05-6400 Lt, Pump Cmpt, 12 Volt LED With Swtch 1 RAS
51-05-9000 I-- Switch on Light Head 1 RAS
51-20-3100 > I-- Fldlt, Mntg Lctn, Front Edge Of Cab Roof 1 RAS
51-15-1290 > I-- Fldlt, FRC, Evolution LED FCA800-V20, 150W, Cab Roof Mnt 1 RAS
51-15-2600 I-- Fldlt, Cab Mt, Brow, Flat Brkt, FRC 1 RAS
51-20-4200 > I-- Lt Swtch , Remote Lctn, In Chassis Cab 1 RAS
54-15-6040 I-- Scene Lt Actvtd, Front Scene, Driver& Offiicer VISTA 1 RAS
52-01-1100 Back Up Alarm, w/Chassis 1 RAS
52-08-1009 I-- Hand Lights, NFPA Compliance- SpI'd/Instl'd by DEPT 1 RAS
53-01-1200 Marker Lts, LED, DOT Requirements 1 RAS
53-02-1200 License Plate Brkt, Stainless w/ LED Lt, Rr, 1 RAS
53-03-0065 Whelen Rr DOT LED Ltng Pkg M6 1 RAS
53-03-2750 I--Tail/Brake Lts, Whelen, LED, M6 (Pair) 1 RAS
53-04-2750 I--Turn Signals, Whelen, LED w/Arrow, M6 (Pair) 1 RAS
53-06-3550 I-- Backup Lts, Whelen, LED, M6 (Pair) 1 RAS
53-07-1210 I--Tail Lt Bezel, 4 Lts, Whin M6 (Pair), ABS Chrome 1 RAS
53-05-1800 Turn Signals, Mid Bdy, LED Marker Lt (Pair) 1 RAS
54-03-1200 I--Ground Lts, Pump Panel, LED, Pair 1 RAS
54-03-1600 I-- Ground Lts, Rr Step, LED, Pair 1 RAS
54-03-1800 I--Ground Lts, Behind Rr Whls, LED, Pair 1 RAS
54-04-1999 I-- Lt Swtch , Ground Lts w/ Park Brake 1 RAS
54-10-1450 Step Lt, Rr Tailboard, LED, Ea 2 RAS
54-11-2100 Lt Swtch , Step/Wlkwy Lts Wired Park Brake Swtch 1 RAS
54-15-4510 > I-- Scene Lt, Fire Research, LED SPA900-Q70, Surface Mount 6 RAS
54-15-5500 < I-- Scene Lt Lctn, Left Side Of Bdy 2 RAS
Install on painted header above compartment doors- not up on side of hosebed
54-15-5600 < I-- Scene Lt Lctn, Right Side Of Bdy 2 RAS
Install on painted header above compartment doors- not up on side of hosebed
54-15-5700 I-- Scene Lt Lctn, Rr Of Bdy 2 RAS
54-15-6440 I-- Scene Lt Actvtd, Left Scene, Driver& Offiicer VISTA 1 RAS
54-15-6540 I-- Scene Lt Actvtd, Right Scene, Driver&Offiicer VISTA 1 RAS
54-15-6640 I-- Scene Lt Actvtd, Rear Scene, Driver& Offiicer VISTA 1 RAS
i 54-15-6700 I-- Scene Lt Swtch , Rr Scene Lts, Auto w/Reverse 1 RAS
02/04/2020 Pa•e 4
PART NO S DESCRIPTION QTY ID
55-11-1100 > Dr Open/Hazard Wrn Lt, w/Chassis 1 RAS
== Pumper/Tanker-Chassis Modifications -601.170 06/01/17 == 1 RAS
10-02-1100 I-- Label, Data, Fluid Levels 1 RAS
10-02-1200 I-- Label, Data, Height x Length, Weight 1 RAS
10-02-1300 I-- Label, Data, "No Ride" Rr Step 1 RAS
10-02-2100 I-- Label, Indicating Number of Seats 1 RAS
10-02-2500 I-- Label, "Caution: Do Not Wear Helmet While Seated" 1 RAS
10-03-6000 I--Tow Plates (2), Rr Frame Rail, Under Step 1 RAS
80-43-2400 I-- Painting, Tow Plates, Blk 1 RAS
10-04-0330 I-- Front Bumpers, 3000, Max Force 12"H, Max Force Wings 1 RAS
10-05-3312 I-- Frnt Bmpr, 3000, Max Force 12"H, T/P Apron, M/F Wings, 12" Extnsn 1 RAS
10-04-3481 > I-- Bumper, High Angle of Approach, Max Force 1 RAS
10-04-2720 > I-- Bumper Cmpt, Center, Hosewell Compt 1 RAS
10-04-3192 < > I--Bumper Cmpt Door, Hngd Front Face 1 RAS
Match previous job#16921-22
10-04-2940 I-- Grating, Bumper Cmpt, Turtle Tile, One (1) Cmpt 1 RAS
10-06-1110 I--Whl Trim, S/S Hub/Lug Cvrs, Front/Rr, Sngl Axle 1 RAS
10-06-1602 I--Tire Pressure Indicator, Sngl Axle, Commanderm p/n RWTG1235 1 RAS
10-07-0100 I-- Exhaust Supplied With Chassis 1 RAS
10-08-2100 I-- Mud Flaps, Rr Whls, Blk, w/ Bdy 1 RAS
02/04/2020 Pa s e 5
PART NO S DESCRIPTION QTY ID
== Midship Pumper/Tanker Pump & Plumbing -601.170 06/01/17 == 1 RAS
20-27-2600 > I-- Pump, Rosenbauer, N 1500 GPM, NP, Midship Splitshaft 1 RAS
20-27-0152 I-- Rosenbauer Pump Body, Light Alloy 1 RAS
20-29-1200 > I-- Primer, Trident Air Primer, Automatic 1 RAS
20-29-1250 I-- Primer Control- Main Pump Rocker Switch 1 RAS
27-10-3500 > I-- Pressure Gvrnr, FRC, In-Cntrl, w/Bdy, TGA400 1 RAS
20-28-3200 I-- Pump Shift, Rosenbauer , Elect/Pneumatic Operated 1 RAS
STAINLESS STEEL PUMP PLUMBING * 1 RAS
21-00-2000 --Screens/Anodes, Pump 1 RAS
21-00-3300 -- Piping, Stnls Stl- 1250 GPM & Up 1 RAS
21-01-0200 > -- Pump Drain, Master, Manifold, Push Pull Type 1 RAS
21-01-5500 -- Intk Manifold, Stnls Stl 1 RAS
21-01-6500 -- Dschg Manifold, Stnls Stl 1 RAS
21-01-7100 -- Painting, Pump & Piping, Silver 1 RAS
21-01-8100 --Threads, National Hose (NST) 1 RAS
22-03-1600 I-- Intk, Ungated, 6", LH Side 1 RAS
22-41-5700 --Cap, 6", Chrome Long Hndl 1 RAS
22-03-2600 I-- Intk, Ungated, 6", RH Side 1 RAS
22-41-5700 --Cap, 6", Chrome Long Hndl 1 RAS
22-51-5210 > I--Tank-To-Pump, Water Tank, 3"Vlv/4" Piping, Midship, Pmpr/Tnkr 1 RAS
22-50-0100 -- Single Tank to Pump Control - Pump Operator's Panel 1 RAS
24-62-2310 > --Vlv Mfger, ELK,(3"), Manual, Std Pull Control 1 RAS
22-55-5040 I-- Intk Vlv Cntrl, Pull Rod, 1/4 Turn Lckg, ELK- IC 1 RAS
23-02-1300 I--Tank Fill/Cooling Line, Water Tank, 2" 1 RAS
24-62-2202 I--VIv Mfger, ELK, (2"), Manual, Std Pull Control 1 RAS
22-55-5040 I-- Intk Vlv Cntrl, Pull Rod, 1/4 Turn Lckg, ELK- IC 1 RAS
20-30-3100 I-- Pump Instln, Midship Split-Shaft, By Bdy Bldr 1 RAS
20-31-3600 Dump-Relief VIv, Suction Side, TFT A18 1 RAS
20-31-4100 Pump Cooler, Bypass-To-Tank, 3/8" 1 RAS
20-31-5200 Heat Exchanger, Engine, Complete 1 RAS
20-31-1000 I-- Fire Pump Testing - Pumpers/Tankers 1 RAS
20-31-1100 I-- Pump Test, Pumper, UL 1 RAS
20-31-1500 I-- Pump Test, Label 1 RAS
22-12-1100 Intk, Aux, Gtd, 2-1/2", NST, Left Side 1 RAS
21-01-2502 I-- Drain/Bleeder, IC Lift-Up, Mnl 1/4 Turn - Spec Only 1 RAS
22-41-1100 I-- Plug, 2-1/2", Chrome Rocker Lug, w/Chain 1 RAS
24-62-2250 I--Vlv Mfger, ELK(2-1/2"), Manual, Swing Type, Adjacent Control 1 RAS
22-55-5020 I-- Intk Vlv Cntrl, ELK, Mnl Swing Type-Adjacent 1 RAS
23-05-3200 < I-- Dschg, 2"x 1-1/2" Front Center Bumper, Swivel, NST Brass Swivel 1 RAS
Do not use a swivel. Have 1.5" NST male threads centered in back wall fac ng
forward
21-01-2200 I-- Drain/Bleeder, Class 1, Automatic 1 RAS
23-05-9100 I-- Hose Connection, Frnt Bmpr, Inside Hosewell, Swivel 1 RAS
24-61-2200 I--Vlv Mfger, ELK, (2"), Manual 1 RAS
24-56-3100 > I-- Dschg Vlv Cntrl, Pull Rod, Cable- IC w/Gauge 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2"400#, WF 1 RAS
02/04/2020 Page 6
PART NO S DESCRIPTION QTY ID
23-06-2200 I--Crosslay Dschgs, (2) 1-1/2", Over Pump Panel, NST 200 ft of 1-3/4-in each 1 RAS
21-01-2502 I-- Drain/Bleeder, IC Lift-Up, Mnl 1/4 Turn - Spec Only 2 RAS
24-61-2200 I--Vlv Mfger, ELK, (2"), Manual 2 RAS
24-56-3100 > I-- Dschg Vlv Cntrl, Pull Rod, Cable- IC w/Gauge 2 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2" 400#, WF 2 RAS
23-08-3300 I-- Crosslay Cvr, Alum T/P, Sngl, WNinyl End Flaps (Non NFPA Walking 1 RAS
Surface)
29-20-5600 I--Vinyl Cover, Color, RED 1 RAS
23-08-4130 I--Crosslay Trim, Alum Angles, Both Sides 1 RAS
23-08-5020 I-- Crosslay Dschgs, Over Pump Panel, Low Height 1 RAS
23-09-4100 Dschg, 2-1/2", Left Side, Pump Panel, NST 2 RAS
21-01-2502 I-- Drain/Bleeder, IC Lift-Up, MnI 1/4 Turn - Spec Only 2 RAS
24-02-1200 I-- Elbow, 2-1/2"F x 2-1/2" NST M, Chrome 2 RAS
24-03-1400 I-- Cap, 2-1/2", NST Chrome, Rocker Lug, w/Chain 2 RAS
24-61-2250 I--Vlv Mfger, ELK, (2-1/2"), Manual 2 RAS
24-56-3100 > I-- Dschg Vlv Cntrl, Pull Rod, Cable- IC w/Gauge 2 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2"400#, WF 2 RAS
23-10-4100 Dschg, 2-1/2", Right Side, Pump Panel, NST 1 RAS
21-01-2502 I-- Drain/Bleeder, IC Lift-Up, MnI 1/4 Turn - Spec Only 1 RAS
24-02-1200 I-- Elbow, 2-1/2"F x 2-1/2" NST M, Chrome 1 RAS
24-03-1400 I--Cap, 2-1/2", NST Chrome, Rocker Lug, w/Chain 1 RAS
24-61-2250 I--Vlv Mfger, ELK, (2-1/2"), Manual 1 RAS
24-56-3100 > I-- Dschg Vlv Cntrl, Pull Rod, Cable- IC w/Gauge 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2"400#, WF 1 RAS
23-10-5200 Dschg, 3" x 4"NST, Right Side, Pump Panel, NST 1 RAS
21-01-2502 I-- Drain/Bleeder, IC Lift-Up, Mnl 1/4 Turn - Spec Only 1 RAS
24-02-2600 I-- Elbow, LW Alum, 5" Storz x 4"F 1 RAS
24-03-2200 I-- Cap, LW Alum, 5" Storz, w/Cable 1 RAS
24-61-2300 I--Vlv Mfger, ELK, (3"), Manual 1 RAS
24-56-3004 > I-- Dschg Vlv Cntrl, Pull Rod, Cable, ELK Slow Cls 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2"400#, WF 1 RAS
23-12-2200 Dschg, 2-1/2", Right Front Hosebed, NST 1 RAS
21-01-2202 I-- Drain/Bleeder, Class 1, Automatic- Spec Only 1 RAS
24-61-2250 I--Vlv Mfger, ELK, (2-1/2"), Manual 1 RAS
24-56-3100 > I-- Dschg Vlv Cntrl, Pull Rod, Cable- IC w/Gauge 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2" 400#, WF 1 RAS
24-11-3200 Monitor Dschg, 3", Over Midship Pump Enclsr, NPT 1 RAS
21-01-2500 I-- Drain/Bleeder, IC Lift-Up, MnI 1/4 Turn 1 RAS
24-61-2300 I--Vlv Mfger, ELK, (3"), Manual 1 RAS
24-56-3004 > I-- Dschg Vlv Cntrl, Pull Rod, Cable, ELK Slow Cls 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2"400#, WF 1 RAS
24-30-3100 > I-- Hose Reel, HAN, Elec, Mt Abv Pump, St' Pntd 1 RAS
02/04/2020 Pa•e 7
PART NO S DESCRIPTION QTY ID
24-31-2100 < I--Hose Reel, Rwnd Cntrl, Weatherproof Push Button 1 RAS
Install switch on right side pump panel
24-32-1200 I-- Dschg, Hose Reel, 1" 1 RAS
21-01-2500 I-- Drain/Bleeder, IC Lift-Up, Mnl 1/4 Turn 1 RAS
24-32-1700 I-- Dschg, Hose Reel, Plmbd to Normal Pressure 1 RAS
24-61-2100 I--Vlv Mfger, ELK, (1") 1 RAS
24-54-0020 > I-- Dschg Vlv Cntrl, Pull Rod, 1/4 Turn, SM, ELK- IC w/Gauge 1 RAS
27-02-1500 > I-- Gauge, Dschg, IC, 2-1/2" 400#, WF 1 RAS
24-33-9100 I-- Roller, Hose Reel, LH Side 1 RAS
24-33-9200 I-- Roller, Hose Reel, RH Side 1 RAS
80-43-1600 I-- Painting, Hose Reel, Silver Grey 1 RAS
25-06-4200 < I-- Foam Sys, F/PRO 2002, CIs A/B, 5G/400P,12V 1 RAS
Plumb to front bumper, crosslays, hose reel and Hosebed 2.5"
25-20-1200 I-- Foam Plmbg, Sngl Class A Tank, 1" MnI Vlv 1 RAS
25-21-1300 I-- Foam Tank, Intgrl Poly, 20 Gal, Class A 1 RAS
25-22-9300 I-- Foam Tank, UPF 1 RAS
25-23-1000 I-- Foam Tank Drain, 1" Gate Vlv, Under Tank 1 RAS
25-24-3000 > I-- Foam Pump, FoamPro, 12V Elec, Refill Transfer 1 RAS
27-36-1100 I-- Foam Tank Gauge, FRC TankVision Pro 300, Class A, Pump Panel 1 RAS
#W LA360-A00
25-19-9000 I-- Foam System, NFPA#1901, Install Standards 1 RAS
== Pumper/Tanker-Side Mount Pump Compt-601.170 06/01/17 == 1 RAS
26-02-2200 > Pump Enc, Side Mt, Extrd Alum, 40-49"W, Crslys 1 RAS
26-10-2100 Pump Enc Cmpt, SM, Dnnge Over Pump, Open 1 RAS
26-30-1100 Rng Brd, LH Pump Panel, Alum T/P, SM 1 RAS
26-30-1150 Rng Brd, RH Pump Panel, Alum T/P, SM 1 RAS
26-31-1300 Pump Side Access Door, Upper RH, S/S 1 RAS
26-35-3200 Pump Panel, Stnls Stl, LH/RH, SM 1 RAS
26-35-1100 I-- Pump Panel, Bltd, LH 1 RAS
26-35-1400 > I-- Pump Panel, Hngd, RH 1 RAS 1
26-55-1100 Labels, Test Data and Safety Placards 1 RAS
26-55-2400 Labels, Innovative Controls Color Coded 1 RAS
26-56-1120 Pump Panel LED Lts, (3) Weldon 2631, Midship LH w/Swtch on Pmp Oprtr's Pnl 1 RAS
26-56-1220 Pump Panel LED Lts (2), Midship RH, Weldon 2631 1 RAS
26-56-2000 Pump Panel Lt(1), Actuated w/Pump Engagement 1 RAS
�- Ga
uges,> - Mstr Gau es, IC, 4" PSI, Pr 1 RAS
27-01-4100 > Gauge, Test Taps 1 RAS
27-35-1100 Water Tank Gauge, FRC, TankVision Pro 300, Pump Panel WLA300-A00 1 RAS
02/04/2020 Pa s e 8
PART NO S DESCRIPTION QTY ID
== HLHD/HRHD Single Axle Pumper/Tanker-901.017 09/01/17 == 1 RAS
25-26-1400 I--Water Tank, 750 Gal, Pmpr/Tnkr , Poly 1 RAS
25-25-0064 I--Water Tank, "L" Tank 1 RAS
25-44-1300 I--Water Tank, Fill Tower, 10" x 10", <1500 Gals 1 RAS
25-42-1100 > I--Water Tank, Base Specs, Poly 1 RAS
25-42-1190 I--Water Tank, Manufacturer, No Preference, Poly 1 RAS
29-10-1000 Hosebed, Grating, Extrd Alum, <180" Long 1 RAS
29-10-5100 < I-- Hosebed, Strge Cpcty, 55 Cubic Feet, Minimum 1 RAS
Hosebed to have capacity to hold 1,000' of 5"and 1,000' of 3"
29-10-8100 Hosebed, Divider, 1/4"Alum 2 RAS
29-10-8700 Full Width Alum Bulk Head Behind Fill Towers 1 RAS
30-01-1900 < Bdy Const- Rosenbauer FX- 3/16"Alum -SA Pmpr/Tnkr 1 RAS
Header panel above the side compartment doors to be painted smooth aluminum -
not diamondplate
30-02-2200 I-- Smooth Alum Compt Floors 1 RAS
30-10-1100 I--Sub Frame, Hot-Dip Galv 1 RAS
31-01-1200 I-- Bdy, Frmd Alum, Pmpr/Tnkr, Up to 160" 1 RAS
44-06-2200 I--Whl Well Panel, Alum Pntd, Sngl Axle -Alum 1 RAS
44-06-4100 I-- Fenderette, Polished Aluminum 1 RAS
31-01-2137 102" OAW, 16-26" Half Dpth Both Sides, SA HL/HR 1 RAS
29-00-1200 I-- Hosebed, Pmpr, <180" L, 68"Wide 1 RAS
32-03-0070 > I--Cmpt Height, 72" High Left 1 RAS
32-03-1070 > I-- Cmpt Height, 72" High Right 1 RAS
32-04-1330 Pntd Roll Up, HL/HR 1 RAS
30-02-1150 I-- Roll-Up Drs- ROM Mfg 1 RAS
30-02-1260 < > I-- Dr Strap, EZ-Pull Down, Ea 6 RAS
Side compartment only- not on rear compartment
30-02-1270 > I-- Dr Roll Up, Drip Pans 7 RAS
30-02-1210 I-- Dr Locks, Roll-Up, Ea 7 RAS
32-05-1125 I--Ahd Rr Whls- Full Ht Comp't- Roll Up Door- Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
- 45-01-1050 I-- Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 < I--Shelf, Adjust, Alum 3/16" 2 RAS
Install in shallow upper section
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 2 RAS
45-30-1400 I--Turtle Tile, Compartment Floor 1 RAS
55-01-1250 I-- Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I-- Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
32-05-1360 I-- Upr Hgh Sde-Sgle Comp't- Roll Up Door- Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I-- Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 I--Shelf, Adjust, Alum 3/16" 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
45-30-1400 I--Turtle Tile, Compartment Floor 1 RAS
55-01-1250 I-- Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
02/04/2020 Pa•e 9
PART NO S DESCRIPTION QTY ID
32-05-1725 I-- Bhnd Rr Whls-Full Ht Comp't- Roll Up Door-Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I--Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 < I--Shelf,Adjust, Alum 3/16" 1 RAS
Install in shallow upper section
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
45-06-1100 > I--Slide Tray, 500#, Alum 3/16",EZ Slide 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
55-01-1250 j--Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
32-06-1125 I--Ahd Rr Whls- Full Ht Comp't-Roll Up Door- Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I--Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 I--Shelf, Adjust, Alum 3/16" 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
45-30-1400 I--Turtle Tile, Compartment Floor 1 RAS
55-01-1250 I--Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
32-06-1460 I-- Upr Hgh Sde-Sgle Comp't- Roll Up Door- Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I--Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-18-1100 I--Tool Board, Swing Out, 250#, 3/16"Alum 1 RAS
45-30-1400 I--Turtle Tile, Compartment Floor 1 RAS
55-01-1250 I--Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
32-06-1725 I-- Bhnd Rr Whls- Full Ht Comp't-Roll Up Door-Painted 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I--Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 < I--Shelf,Adjust, Alum 3/16" 1 RAS
Install in shallow upper section
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
45-06-1100 > I--Slide Tray, 500#, Alum 3/16",EZ Slide 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
55-01-1250 I--Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
33-60-1500 > Rr Bdy, Rcsd Square Back 1 RAS
32-08-0200 S I-- Rr Cntr Comp't- Full Ht Roll Up/Non Trans- Painted Finish 1 RAS
44-40-1100 I--Vents, Compts, Louvers, Includes Filters (Ea) 1 RAS
45-01-1050 I--Shelving Tracks, (2) Unistrut, Alum 1 RAS
45-02-3100 I--Shelf, Adjust, Alum 3/16" 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
45-06-1100 > I--Slide Tray, 500#, Alum 3/16",EZ Slide 1 RAS
45-30-1300 I--Turtle Tile, Shelves/Trays, (each) 1 RAS
55-01-1250 I--Cmpt Lt, Wall, ROM,V3 LED Track Lt, (2) Ea Cmpt 1 RAS
55-06-1400 I--Cmpt Lt, Dr Swtch, Magnetic, Ea 1 RAS
33-61-3300 I--Rr Step, Pmpr-Tnkr Bdy, Rcsd Style, 12" 1 RAS
90-02-3500 Ladder Strge, Vrtcl Slide In, Right Rr Bdy 1 RAS
90-02-2920 I--Compt Door, Smooth, With Chevron 1 RAS
90-02-5300 Ladder Mtg, Fldg Attic , External 1 RAS
90-03-0225 Ladders, Ground, Provd'd By Bdy Bldr, SD 1 RAS
90-16-5200 Pike Pole Mtg Tube, Intrnl, Ea 2 RAS
02/04/2020 Page 10
PART NO S DESCRIPTION QTY ID
90-25-9300 > Suction Hose Provd'd By, Purchaser/Fire Department 1 RAS
90-25-3199 I-- Non-Bdy Bldr Suppl'd Suction Hose, Flex, PVC, 6"x10'-MN 2 RAS
90-25-6120 I-- Non-Bdy Bldr Supl'd Sctn Hse Cplgs, Alum, LH FM x RLM-MN 2 RAS
== Pumper/Tanker-Common Body Parts -601.170 06/01/17 == 1 RAS
33-66-1140 I-- Steps, Fldg, Frnt, Left Hand (3), Integral LED Lts 1 RAS
33-66-2140 I-- Steps, Fldg, Frnt, Right Hand (3), Integral LED Lts 1 RAS
44-01-1450 I-- Bdy Trim, Frnt Cmpt, Ht of Side Cmpts, Alum T/P 1 RAS
Rr BODY DESIGN -PUMPER/TANKER 1 RAS
44-01-4000 I-- Bdy Trim, Entire Rr Bdy, Smooth for Chevron Stripe 1 RAS
33-62-4140 I-- Steps, Fldg, Rear, Left Hand (3), Integral LED Lts 1 RAS
33-62-4240 I-- Steps, Fldg, Rear, Right Hand (3), Integral LED Lts 1 RAS
33-70-1201 I-- Handrail, Alum, Lighted, White LED, Rr Step, Vert, 30", Pair 1 RAS
33-70-2101 I-- Handrail, Alum, Lighted, White LED, Below Hosebed, Horz, 48" 1 RAS
44-02-1100 I-- Rub Rails, Lwr Bdy, Extrd Alum 1 RAS
44-02-2000 I-- Rub Rails, Spacers, Nylon 1 RAS
44-11-5100 WhI Well Prvsns, Ahd of Whls Left Side 1 RAS
44-10-3020 < > I--WhI Well Cmpt, Four(4) SCBA Tube, Brshd S/S Dr 1 RAS
SCBA bottles 7.5" x 24"
44-10-6000 I--WhI Well Compt, SCBA Compt Straps 4 RAS
44-11-5300 Whl Well Prvsns, Bhnd Whls Left Side 1 RAS
44-07-1700 I-- Fuel Fill Door Assy, BSST, Poly Pckt, LH Whl WII Pnl, (Fire Shopp) 1 RAS
44 11 5500 Whl Well Prvsns, Ahd of Whls Right Side 1 RAS
44-10-3020 < > I--WhI Well Cmpt, Four(4) SCBA Tube, Brshd S/S Dr 1 RAS
SCBA bottles 7.5" x 24"
44-10-6000 I--Whl Well Compt, SCBA Compt Straps 4 RAS
44-11-5700 Whl Well Prvsns, Bhnd Whls Right Side 1 RAS
44-07-3700 > I-- Fuel Fill Door Assy, BSST, Poly Pckt, RH Whl WII Pnl (Fire Shopp) 1 RAS
== Pumper/Tanker-AC Electrical System -601.170 06/01/17 == 1 RAS
t
02/04/2020 Pa.e 11
PART NO S DESCRIPTION QTY ID
== Pumper/Tanker-Equipment Systems -601.170 06/01/17 == 1 RAS
== Pumper/Tanker-Single Axle - Pnt/Ltr/St-601.170 06/01/17 == 1 RAS
80-05-1200 Bdy Paint, Sngl Axle, Pmpr/Tnkr-Sngl Color 1 RAS
80-06-1100 < I--Apparatus Color 1 RAS
Red to match Pierce#90
80-34-1200 Compt Finish, Line-X Up to 8 Cmpts 1 RAS
80-34-9000 I--Compt Finish, Liner Matl, Grey 1 RAS
80-40-1100 Whls, Alum, By the Chassis Manufacturer 1 RAS
80-42-1500 Bdy Paint, Touch Up, 2 oz. Bttl, One Color 1 RAS
80-50-1200 Lettering Supl'd by Purchaser 1 RAS
80-55-2200 Striping, Mylar Gold Leaf, Cab Pntd Break Line 1 RAS
80-71-1500 > Stripe, Triple Reflective, 1" x 6"x 1" Large"S" Design 1 RAS
80-75-1600 I-- Reflective Stripe Material, White 1 RAS
80-72-1100 Stripe, Reflective 3M, Chevron Pattern Entire Rr Red/Yellow 1 RAS
== Pumper/Tanker- Loose Equipment-601.170 06/01/17 == 1 RAS
90-01-5900 Whl Chocks Pair Zico#SAC-44 Fldg w/ Mts 1 RAS
90-03-3300 I-- Ladder, Roof, Duo-Safety, 14'Alum 775-A 1 RAS
90-06-4600 I-- Ladder, Ext, Duo-Safety, 24'Alum, 2 Sect 900-A 1 RAS
90-08-2600 I-- Ladder, Attic, Duo-Safety, 10'Alum, Fold 585-A 1 RAS
90-16-2300 I-- Pike Pole, 6' Fbgls, Round Hndl 1 RAS
90-16-2600 I-- Pike Pole, 8' Fbgls, Round Hndl 1 RAS
02/04/2020 Pa•e 12
PART NO S DESCRIPTION QTY ID